CRUNCH POWERZONE PZA AMPLIFIER SERIES

For over 7 years the CRUNCH POWERZONE series has set the standard for dollar per watt value.
With a versatile lineup of 2-Channel, 4-Channel and mono amplifiers, POWERZONE is once again “Best in Class.” This years offering features added value to an already bullet proof lineup. The new black hairline extrusion is set off by diamond cut ridges, molded plastic end panels and the illuminated CRUNCH logo with a chrome hot stamp treatment so that the cool blue logo provides a soft glow across your amplifier. This new POWERZONE lineup features top mount controls which are normally only offered in much more expensive amplifier series. These top mount controls aid in ease of dialing in your system after you’ve installed the amplifier rather than trying to lean down next to the amplifier to make adjustments in tight quarters.

The heart of the POWERZONE series is driven by a rugged MOSFET Pulse Width Modulation Power Supply for instant MAXX power output! The POWERZONE series is based on SEPP A/B class technology from over 30 years of experience bringing you the reliability and quality performance that you demand. Packed full of custom adjustments, POWERZONE amplifiers feature HIGH-PASS Versa Cross X-Overs, LOW-PASS Versa Cross X-Overs, variable BASS EQ, STEREO/MONO Mode switch, FULL/LPF/HPF X-Over switch and variable LEVEL so that control is at your finger tips. Longevity of your investment is very important to us and that is why the POWERZONE amplifier series features our integrated Protection System with Diagnostic LEDs to Protect against Current/Amperage Overload, Short Circuits, Thermal Overload and DC Offset.


Model
Description
Two-Channel
PZA700.2 2 x 350W @ 2 OHMS, 2 x 175W @ 4 OHMS, 1 x 700W Mono Bridged @ 4-OHMS
PZA1400.2 2 x 700W @ 2 OHMS, 2 x 350W @ 4 OHMS, 1 x 1400W Mono Bridged @ 4-OHMS
PZA1800.2 2 x 900W @ 2 OHMS, 2 x 450W @ 4 OHMS, 1 x 1800W Mono Bridged @ 4-OHMS
Four-Channel
PZA900.4 4 x 225W @ 2 OHMS, 4 x 115W @ 4 OHMS, 2 x 450W Mono Bridged @ 4-OHMS
PZA1200.4 4 x 300W @ 2 OHMS, 4 x 150W @ 4 OHMS, 2 x 600W Mono Bridged @ 4-OHMS
PZA1600.4 4 x 400W @ 2 OHMS, 4 x 200W @ 4 OHMS, 2 x 800W Mono Bridged @ 4-OHMS
Mono-Block
PZA1500.1 1 x 1500W @ 1 OHM, 1 x 750W @ 2 OHMS, 1 x 375W @ 4-OHMS
PZA2000.1 1 x 2000W @ 1 OHM, 1 x 1000W @ 2 OHMS, 1 x 500W @ 4-OHMS

POWERZONE Series Amplifiers Features:

  • New Higher Power Amplifiers from Crunch
  • Military PCB Design
  • SEPP A/B Analog Class
  • 4/2 Ohm Stable Multi-Channel Models
  • Multi Channel Configurable 5/4/3/2/1
  • PWM Power Supply
  • Fully Adjustable 12dB Crossovers
  • Input Sensitivity From .2 to 5 V
  • High and Low Level Inputs
  • Bass Remote Included with PZA1500.1 & PZA2000.1
  • Subsonic Filter, Bass EQ

 

 

POWERZONE Mono/Multi-Channel
Amplifiers Features:

Mono Amps

  • High Efficiency A/B-Class Technology
  • 4/2/1 Ohm Stable
  • Bass (Level) Remote
  • 45Hz Bass EQ
  • Variable Low Pass and Subsonic Filters

Multi-Channel Amps:

  • A/B Analog Class
  • High Level Inputs on 2-Channel and 4-Channel Models Only
  • 4/2 Ohm Stable
  • 45Hz Bass EQ
  • Variable Low Pass and High Pass Filters
  • Selectable FULL/LPF/HPF X-OVER
  • Selectable Switch for Internal RCA Signal Routing